Silo-quick Special silo varnish
Professional protection varnish for silos
Ready for use, PCP / PCB-free, heat-resistant
-
Advantages
✓ PCB-free
✓ PCP-free
✓ heat resistant up to 100 °C -
Technical data
Product Volume shares / pallet Silo-quick bitumen primer (black) 30 liters 16 buckets Silo-quick silo varnish (black) 10 liters 45 buckets Silo-quick silo varnish (black) 30 liters 16 buckets Silo-quick silo varnish (black) 200 liters 2 barrels Silo-quick ground varnish special (black) 30 liters 16 buckets Silo-quick Bitumen hardener (colourless) 10 liters 45 buckets Silo-quick wall varnish (green) 21 kg 16 buckets Silo-quick Bitumen filler (black) 10 kg - Silo-quick Joint sealant 300 ml - Inking roller set 30 pieces / package - -
Silo-quick bitumen primer
This special primer based on bitumen is used for green fodder containers, potato ensilage pits, water receptables and slurry silos. Consumption: 200-300 ml/ m² with good adherence and depth anchorage.
-
Silo-quick wall varnish, black
Is a ready for use, bitumen-based and solvent-containing varnish for silos and is suited for the protection of open silos storing corn and green forage. This special bitumen varnish can be applied by painting, rolling or spraying. The varnish is resistant to diluted alkaline solutions and acids.
New silos should be painted with silo-bitumen primer first. In a second step three coatings of bitumen silo varnish should be applied. For silos in biogas plants it is advisable to apply the bitumen varnish together with the hardener.
Consumption: 200 – 300 ml / m² depending on the ground.
-
Silo-quick ground varnish special, black
This varnish has an improved elasticity and adhesion due to the use of special additives in the production. Because of the intense demands of the silo ground, the durability of the varnish has been improves with the aim to prevent abrasion of the varnish.
-
Silo-quick Bitumen hardener
A chemical hardening, solvent-based reactive component, which activates the bitumen coats. The hardener accelerates the drying and hardening time. Also the stability of the individual coats and the protection against acids is improved. Bitumen varnish is mixed with bitumen hardener in a proportion of 3:1.
-
Silo-quick wall varnish, green
This varnish is a one-component, non-solvent/food-grade protective coating on a modifies acrylic-polymer basis. It does not contain any bitumen or tar, is water-dilutible and silk matt. The varnish can be applied to the inside and outside of old and new silos, especially bunker silos, manure boxes, milking kitchens, stable walls and facades, etc.
The underground has to be stable, clean and dry while using the Silo-quick wall varnish green. Consumption about 500 g/m² (3 coats including diluted primer). Needs to be protected from frost!
-
Silo-quick Bitumen-filler
Sealing fibre kit for the reparation of holes and cracks in silos, components of cement and walls. The filler is an asbestos-free bitumen compound which has to be processed cold.
-
Silo-quick Joint sealant
Elastic joint sealant and adhesive filler for silos, components of cement and walls. Our joint sealant is characterized by its good stretching and tear-resistance, its resistance against weather influences, its resistance against acids and bases and its fast skin formation after application.
Accessory
-
Inking roller set
The inking roller set consists of two 25cm rolls (suitable for bitumen), a stirrup and a grid.
You are looking for an alternative solution? Visit our product group side-wall films.